PowerWash Simulator
91 Achievements
58-72h
PS5
Shine Bright
On the Helter Skelter, complete the objects that have lightbulbs before anything else
2.6%
How to unlock the Shine Bright achievement in PowerWash Simulator - Definitive Guide
there are 3 different parts to complete for this
1x Sign - you only need the banner for this not the side poles
16 x Channel Lights - These are around the mid-top section around the skelter
1 x Top Ring Frame - This is the area attached to the lights off the side of the top walkway, it wraps around the edge and it's the lip on the inside connected to the skelter
It should take you the longest to do the Top Ring frame so I suggest you go for that first the others are alot faster/easier to clean
1x Sign - you only need the banner for this not the side poles
16 x Channel Lights - These are around the mid-top section around the skelter
1 x Top Ring Frame - This is the area attached to the lights off the side of the top walkway, it wraps around the edge and it's the lip on the inside connected to the skelter
It should take you the longest to do the Top Ring frame so I suggest you go for that first the others are alot faster/easier to clean
14 Comments
In case someone need a short video guide about this achievement and solution - https://www.youtube.com/watch?v=b_0JMQknc5g
By Zasta 360GameTV on 20 Jul 2022 11:40
Those channel lights are a right rain to wash. Some parts you can't get close up, and it becomes "spray and pray" from a distance 😤
By ttfp saylow on 11 Aug 2022 11:43
For this trophy, you will need to clean 3 parts before completing any other. Press pause to bring up the menu and select one of the following for each turn:
•Sign
•Channel lights
•Top ring frame
If you're not sure, stop cleaning the object and wait for it to flash.
I recommend to use small nozzles (such as the red and white ones) to avoid accidental completion of the other objects.
•Sign
•Channel lights
•Top ring frame
If you're not sure, stop cleaning the object and wait for it to flash.
I recommend to use small nozzles (such as the red and white ones) to avoid accidental completion of the other objects.
This is a slightly fiddly achievement, and requires you clean the 16 "channel lights" around the outside (at the top of the third panel and in between the seams of the fourth tier panels - you'll see the little spheres, which are lightbulbs), as well as the front sign (that's at the bottom of the steps) and finally, the "top ring frame" which has them all around the outside of the top platform.
Few things to note: some of the channel lights can be tricky as they're covered by the slide itself, so come from above and below them to get those while stood on the slide. Be careful of the slide frame and slide supports though. And finally, the top ring frame, you have to do all of it, and that includes the lightbulbs, the top and the bottom (underneath). Again, just see what you've got selected in the top left before you start spraying willy nilly.
Few things to note: some of the channel lights can be tricky as they're covered by the slide itself, so come from above and below them to get those while stood on the slide. Be careful of the slide frame and slide supports though. And finally, the top ring frame, you have to do all of it, and that includes the lightbulbs, the top and the bottom (underneath). Again, just see what you've got selected in the top left before you start spraying willy nilly.
This is a slightly fiddly trophy, and requires you clean the 16 "channel lights" around the outside (at the top of the third panel and in between the seams of the fourth tier panels - you'll see the little spheres, which are lightbulbs), as well as the front sign (that's at the bottom of the steps) and finally, the "top ring frame" which has them all around the outside of the top platform.
Few things to note: some of the channel lights can be tricky as they're covered by the slide itself, so come from above and below them to get those while stood on the slide. Be careful of the slide frame and slide supports though. And finally, the top ring frame, you have to do all of it, and that includes the lightbulbs, the top and the bottom (underneath). Again, just see what you've got selected in the top left before you start spraying willy nilly.
Few things to note: some of the channel lights can be tricky as they're covered by the slide itself, so come from above and below them to get those while stood on the slide. Be careful of the slide frame and slide supports though. And finally, the top ring frame, you have to do all of it, and that includes the lightbulbs, the top and the bottom (underneath). Again, just see what you've got selected in the top left before you start spraying willy nilly.
This guide was translated automatically.
spiral slide level
1 - sign (located in front of the entrance)
2 - lights in the tunnel (16 pieces in the middle of the tower)
3 - rim of the upper ring (located at the upper level along the edge of the floor)
1 - sign (located in front of the entrance)
2 - lights in the tunnel (16 pieces in the middle of the tower)
3 - rim of the upper ring (located at the upper level along the edge of the floor)
This guide was translated automatically.
You need to wash the sign, 16 lights in the tunnel and the rim of the upper ring.
We cannot show the content due to copyright protection. Please click the link below to view the guide.
We cannot show the content due to copyright protection. Please click the link below to view the guide.