RoboCop: Rogue City
27 Achievements
1000 XP
15-20h
Epic
Good eyes, Murphy!
Find a PCB for Auto-9 in a secret area of Steel Mill.
35 XP
2.0%
How to unlock the Good eyes, Murphy! achievement in RoboCop: Rogue City - Definitive Guide
This video helped me.
6 Comments
After getting this I found a manual for locomotives, it mentioned starting them with a short circuit. Not sure, but that could enable you to do this when you don't have the skillpoints in that tree. Or it is just a hint to check the locomotive *shrug*
The manual was downstairs in the building right next to where the locomotive stands, in the doorway opposite of the entrance to the "destroy unwanted drugs"-sidequest.
The manual was downstairs in the building right next to where the locomotive stands, in the doorway opposite of the entrance to the "destroy unwanted drugs"-sidequest.
By appare13 on 04 Nov 2023 20:34
Yeah I can confirm you don’t need the 3 skill points in the engineering skill tree to start the engine. If you don’t have the skill you can go into the nearby building as @appare in the comments said - there’s a manual to scan for the locomotive to start it’s engine
By mCaPP09 on 05 Nov 2023 03:12
Short video with the location of secret area of Steel Mill and how to get there.
2 Comments
I don't know why your guide don't have more likes, that's easier then stacking the skill points
By WillGoss12 on 09 Dec 2023 20:47
Yeah, I agree. I missed this achievement the first time around and had to load an old save. But I didn't have any points in engineering at that point, so this was super useful to save me going back and gaining three level ups.
By Triblade on 28 Dec 2023 16:53
In this guide we will show you how to find the PCB for Auto-9 at Steel Mill to earn "Good Eyes, Murphy!" Achievement/Trophy in RoboCop: Rogue City.
During the "Street Vulture's Turf" quest, the game's third main quest, you'll jump into the territory of the Street Vultures gang, who are allegedly holding a police officer hostage.
This area is quite large and is divided into several sections. The last section is called Steel Mill and includes a main mission, as well as two optional missions. In this map there is a hidden area, which hides a powerful motherboard for the Auto-9, RoboCop's pistol. In fact, if you collect this motherboard you will earn "Good Eyes, Murphy!" Achievement/Trophy.
Starting from the spot on the map shown in the video, go straight until you reach the train engine and hold down the square button (or X button if you're playing on Xbox) to start the engine. Your Engineering Level should be at least at 3 before you can start the train, , or alternatively you should have scanned the user manual, which can be found in the Steel Mill's "North Stronghold".
Once the train is running follow it until it stops, and climb the ladder on the right hand side. The stairs will lead you to a small room, where there is a chest. Open it and the motherboard will be yours.
During the "Street Vulture's Turf" quest, the game's third main quest, you'll jump into the territory of the Street Vultures gang, who are allegedly holding a police officer hostage.
This area is quite large and is divided into several sections. The last section is called Steel Mill and includes a main mission, as well as two optional missions. In this map there is a hidden area, which hides a powerful motherboard for the Auto-9, RoboCop's pistol. In fact, if you collect this motherboard you will earn "Good Eyes, Murphy!" Achievement/Trophy.
Starting from the spot on the map shown in the video, go straight until you reach the train engine and hold down the square button (or X button if you're playing on Xbox) to start the engine. Your Engineering Level should be at least at 3 before you can start the train, , or alternatively you should have scanned the user manual, which can be found in the Steel Mill's "North Stronghold".
Once the train is running follow it until it stops, and climb the ladder on the right hand side. The stairs will lead you to a small room, where there is a chest. Open it and the motherboard will be yours.
In this guide we will show you how to find the PCB for Auto-9 at Steel Mill to earn "Good Eyes, Murphy!" Achievement/Trophy in RoboCop: Rogue City.
During the "Street Vulture's Turf" quest, the game's third main quest, you'll jump into the territory of the Street Vultures gang, who are allegedly holding a police officer hostage.
This area is quite large and is divided into several sections. The last section is called Steel Mill and includes a main mission, as well as two optional missions. In this map there is a hidden area, which hides a powerful motherboard for the Auto-9, RoboCop's pistol. In fact, if you collect this motherboard you will earn "Good Eyes, Murphy!" Achievement/Trophy.
Starting from the spot on the map shown in the video, go straight until you reach the train engine and hold down the square button (or X button if you're playing on Xbox) to start the engine. Your Engineering Level should be at least at 3 before you can start the train.
Once the train is running follow it until it stops, and climb the ladder on the right hand side. The stairs will lead you to a small room, where there is a chest. Open it and the motherboard will be yours.
During the "Street Vulture's Turf" quest, the game's third main quest, you'll jump into the territory of the Street Vultures gang, who are allegedly holding a police officer hostage.
This area is quite large and is divided into several sections. The last section is called Steel Mill and includes a main mission, as well as two optional missions. In this map there is a hidden area, which hides a powerful motherboard for the Auto-9, RoboCop's pistol. In fact, if you collect this motherboard you will earn "Good Eyes, Murphy!" Achievement/Trophy.
Starting from the spot on the map shown in the video, go straight until you reach the train engine and hold down the square button (or X button if you're playing on Xbox) to start the engine. Your Engineering Level should be at least at 3 before you can start the train.
Once the train is running follow it until it stops, and climb the ladder on the right hand side. The stairs will lead you to a small room, where there is a chest. Open it and the motherboard will be yours.
1 Comment
Good guide, though I was only engineering level 2 and could still start the train
By MobiusEvalon on 09 Apr 2024 06:59
You can get this trophy after you have moved on from Steel Mill to the Quarry area. After you have gone through the gates, you will get two new side missions. Move towards the marker for "Destroy the drugs". You'll go down some stairs but instead of entering the building with the drugs, go a few meters in the opposite direction to a small room with a recovery charge and a train operator's manual. Scan the manual to learn how to jump start a train engine.
Where to find the room with the manual:
The manual:
After this, backtrack towards the gates to the steel mill, until you see a yellow train engine. Find the spot which can be activated (on the right side of the engine, towards the back). The train starts moving and crashes through a couple of gates.
Follow the train and when it stops, climb the ladder on its left hand side. When on top, turn 180 degrees and you'll find the box with PCB is in a small room right in front of you.
Where to find the room with the manual:
The manual:
After this, backtrack towards the gates to the steel mill, until you see a yellow train engine. Find the spot which can be activated (on the right side of the engine, towards the back). The train starts moving and crashes through a couple of gates.
Follow the train and when it stops, climb the ladder on its left hand side. When on top, turn 180 degrees and you'll find the box with PCB is in a small room right in front of you.
You can get this trophy after you have moved on from Steel Mill to the Quarry area. After you have gone through the gates, you will get two new side missions. Move towards the marker for "Destroy the drugs". You'll go down some stairs but instead of entering the building with the drugs, go a few meters in the opposite direction to a small room with a recovery charge and a train operator's manual. Scan the manual to learn how to jump start a train engine.
Where to find the room with the manual:
The manual:
After this, backtrack towards the gates to the steel mill, until you see a yellow train engine. Find the spot which can be activated (on the right side of the engine, towards the back). The train starts moving and crashes through a couple of gates.
Follow the train and when it stops, climb the ladder on its left hand side. When on top, turn 180 degrees and you'll find the box with PCB is in a small room right in front of you.
Where to find the room with the manual:
The manual:
After this, backtrack towards the gates to the steel mill, until you see a yellow train engine. Find the spot which can be activated (on the right side of the engine, towards the back). The train starts moving and crashes through a couple of gates.
Follow the train and when it stops, climb the ladder on its left hand side. When on top, turn 180 degrees and you'll find the box with PCB is in a small room right in front of you.
When visiting the Steel Mill looking for Briggs, you will eventually be directed to the Quarry at the north.
It is the large open area with mines and construction machines.
Go directly to the right when entering the quarry.
You will eventually find a yellow train.
You can turn it on by pushing a button on the side (need to be Engineering Level 3).
The train will follow the tracks and open two closed doors.
Directly to the right after the first one, a door will lead you to a secret area along with a side quest to get some XP and some Auto-9 chips.
For the achievement, you need to follow the tracks up to their end, climb the train and enter the secret area above. Grab the PCB motherboard on the desk.
It is the large open area with mines and construction machines.
Go directly to the right when entering the quarry.
You will eventually find a yellow train.
You can turn it on by pushing a button on the side (need to be Engineering Level 3).
The train will follow the tracks and open two closed doors.
Directly to the right after the first one, a door will lead you to a secret area along with a side quest to get some XP and some Auto-9 chips.
For the achievement, you need to follow the tracks up to their end, climb the train and enter the secret area above. Grab the PCB motherboard on the desk.
This achievement takes place in the third main mission, "Street Vulture's Turf," which sends you to a single large area.
It'll take most of the mission before you access the northern part of this map. Once you get there, you'll reach an area that looks like a scrapyard, covered in trash, and mines all over the ground. Off to the right path, there is a yellow train there that you need to do. If you have 6 points in Engineering, you can simply interact with the train to move it. If not, and you don't want to spend the skill points (or don't have them), there is a manual you can scan to give you the knowledge to move the train without Engineering points. If you have the side mission to destroy the drug stash, this manual is located right across from the door leading to this mission. It's just north of the train, down in a trench. There is a door you enter to follow the side mission for destroying the drug stash. With your back to that door, walk straight ahead to the end of the trench and enter the small room on your right. Scan the manual on top of the barrel, and now you can interact with the train without spending skill points. See video below of the manual. Full credit to the creator of the video.
Once you move the train, follow it. When it stops, climb up the ladder on its side, turn around, cross the plank, and in this small room you'll find a PCB that unlocks this achievement.
It'll take most of the mission before you access the northern part of this map. Once you get there, you'll reach an area that looks like a scrapyard, covered in trash, and mines all over the ground. Off to the right path, there is a yellow train there that you need to do. If you have 6 points in Engineering, you can simply interact with the train to move it. If not, and you don't want to spend the skill points (or don't have them), there is a manual you can scan to give you the knowledge to move the train without Engineering points. If you have the side mission to destroy the drug stash, this manual is located right across from the door leading to this mission. It's just north of the train, down in a trench. There is a door you enter to follow the side mission for destroying the drug stash. With your back to that door, walk straight ahead to the end of the trench and enter the small room on your right. Scan the manual on top of the barrel, and now you can interact with the train without spending skill points. See video below of the manual. Full credit to the creator of the video.
Once you move the train, follow it. When it stops, climb up the ladder on its side, turn around, cross the plank, and in this small room you'll find a PCB that unlocks this achievement.
This guide was translated automatically.
On the mission where the bikers appear for the first time, you need to launch a train that will break through two gates. To do this, you need to upgrade Engineering to 3 or find information on how to launch it at the location. Afterwards, you need to follow him and climb up the stairs to the roof of the train, where you will cross the boards to a small platform, where the chip lies.
The game does not allow you to replay chapters, but there are auto-saves for all 26 main quests, so you can return if you missed them.
The game does not allow you to replay chapters, but there are auto-saves for all 26 main quests, so you can return if you missed them.
2 Comments
Video guide (en).
By DespairZz on 26 Dec 2023 23:22
This guide was translated automatically.
The trophy is glitched, didn't drop
I figured it out: when you start the game, you need to click the “play” option, not “continue”.
Here's a bug
I figured it out: when you start the game, you need to click the “play” option, not “continue”.
Here's a bug
We cannot show the content due to copyright protection. Please click the link below to view the guide.
We cannot show the content due to copyright protection. Please click the link below to view the guide.